Chase Bays Brake Line Relocation for Nissan S13 / S14 / S15 with Single Piston Brake Booster Delete – RHD only, in Bay

Description

The Chase Bays Brake Line Relocation for Nissan S13, S14 and S15 chassis with Brake Booster Eliminator (BBE) is designed for enthusiasts who want to eliminate engine bay clutter and improve braking performance by;

• Relocating the brake lines in a much more practical way. (aka Brake Line Tuck or Tucked Brake Lines)
• Replacing the factory proportioning valve / block with our Adjustable Bias Valve.
• Deleting ABS, if applicable
• Compensating for a different master cylinder setup (IE: Brake Booster Eliminator)
• Compensating for a larger engine accessory setup (IE: Turbo Manifold and Downpipe or Intake Manifold)

**BRAKE BOOSTER ELIMINATOR (BBE) NOT INCLUDED WITH THIS PURCHASE** Click here to link to the Nissan BBE.

The OEM brake hard lines are relocated and replaced and with -3AN stainless steel braided, Teflon PTFE lined, black PVC coated lines. We use the best components in the industry and we pressure test every line we assemble. We guarantee a leak free start up if this product is installed correctly. CLICK HERE if you need the OE Master Cylinder Brake Line Relocation Kit.

This kit is sold with inBay or inInterior options. The inBay keeps all the lines in the engine bay and mounts the Adjustable Bias Valve to a master cylinder bolt. We have designed the lines to route in the best path possible. Low on the firewall, behind steering column, under frame rail…however we find is the best look while remaining easy to install. Plus, of course, a safe distance from high heat and/or moving objects.

The inInterior kit relocates the lines and Adjustable Bias Valve on the interior side of the firewall. In most cases there is just one or two lines in the engine bay. It requires drilling 6 holes in the firewall, removing the dash, and tightening 30+ Brake Line connections. The inBay is a more popular purchase but for those wanting to completely crazy tucked engine bay look, inInterior is the way to go.

The Brake Line Relocation replaces all of the engine bay hard lines up to the lines in the fenderwell. It does not include the fenderwell to caliper lines. Those are available separately here. The front to rear line is adapted two different ways depending on if inBay or inInterior. For inBay, the small joining block on the passenger side frame rail is removed and replaced with our male to female adapter. Once it is removed our supplied hose will connect directly to it.

For inInterior, the factory hard line is cut, reamed, and the supplied tube nut / tube sleeve is slid onto the hard lines. The hard line is then flared to 37º degrees using a PROPER 37º FLARE TOOL. That will attach directly to the 90º firewall bulkhead fitting, which will then run to the Bias Valve OUT section.