Description
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Designed for the K20A engine.
- Please check your connector matches the header in the listed photo before purchasing.
- This ECU works for manual transmissions only.
- ECU includes an onboard 7 bar MAP sensor.
- Most factory features are supported.
- Check the features tab for I/O expansion options
Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Code 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.
Suitable Applications (Manual Transmission only):
- Acura RSX 2002-2004 with K20A/K20A2/K20A3
- Honda Integra Type R DC5 2002-2004 with K20A/K20A2/K20A3
- Honda Civic Type R EP3 2001-2005 with K20A
- Honda Civic Si/SiR 2001-2005 with K20A3
- Honda Civic DX/LX/HX 2001-2005 with D17A1/A2/A3
- Honda CR-V 2002-2004 with K24A1
Key Features:
- Reverse Lockout Control
- Electrical Load Detection
- 2x General Purpose Expansion Plugs (includes E-Throttle pins)
- 16 x Auxiliary Outputs (10 of which are PWM capable).
- Injector Drives 5-8 are available for Staged Injection (some rewiring required).
- 10 x Digital Inputs exposed (all capable of reading frequencies up to 10kHz)
- 4 x Temperature Inputs (configurable pull-ups on ANT1&2)
- 12 x 0-5V Analog Inputs
- 2 x Trigger Inputs (Reluctor, Optical or Hall Sensors)
- 2 x CAN ports
- 3 Axis Accelerometer
- Motorsport features – including Anti-lag, Launch Control, Flat Shifting, Traction Control
- 512MB of Internal Data Logging Memory
Reviews
There are no reviews yet.