Description
The GKTECH FR-S/BRZ bolt on angle kit is a simple, lightweight, yet super effective bolt on steering kit.
It is a bolt on kit, meaning it can be fitted and removed with no modifications. A completely reversible install.
With 30% faster steering these are suitable for both the dedicated drift cars whilst working equally as well for a grip/street car looking to speed your steering up.
If you own one of these vehicles, you would know the OEM steering angle on the FR-S/BRZ sucks! We measured them to having less than 40 degrees lead wheel and even less trailing. This kit will allow you to get around 60 degrees of lock lead wheel and with adjustable ackerman you can acheive near parallel front steering.
More information on this can be seen in the FAQ below.
– 30% faster steering
– Adjustable ackerman
– Circa 60 degrees of steering lock
FAQS
Will this fit the aluminum knuckle?
No, this is designed to suit the steel knuckle only.
Does installing this kit require a wheel alignment?
Yes, it alters both toe so a wheel alignment will be required after installation.
Will this fit my car?
We can only confirm fitment for the vehicles listed above under “vehicle compatibility”. If your car is not listed there, then we don’t know if it will fit.
Is there anything else needed for installation?
There is nothing else that is critical to the installation but offset rack spacers are a good idea to help with steering bind. They can be seen/purchased here: https://us.gktech.com/fr-s-86-brz-high-tensile-offset-steering-rack-extenders11
What size wheel spec should I use for best clearance?
Any size wheel would work, but optimally for the GT86 chassis you want as much inside clearance as possible so that you can clear the frame rails etc on lock.
When testing we used a 18×9 +12 wheel for most of our bolt on angle kit testing to get the most amount of lock.
Can I install this myself? If so how long will installation take?
Yes, provided you have general mechanical knowledge as they are relitively straightforward. Installation time should be around 30 minutes. However, being a suspension component we recommend only a trained professional to install this product
Are there any special tools required?
No, a spanner set will do the job which we do sell separately here – open ended wrenches
Do you have replacement dust boots?
Yes, they can be seen here – PCY HEIM REPLACEMENT DUST BOOT
Reviews
There are no reviews yet.