Description
This Kit Is Developed Based on a 4×4 Chassis, It Should Fit the RWD As Well. This Is Our Innovated Design for F150, No Cut, Bolt On Fitment and Makes Big Power.
- T76 Big Turbo, Supports 600 HP
- 60mm Vband Wastegate
- 3″ Turbo Downpipe
- 2.5″ Header Cross Pipe
- 50mm BOV
- Bolt On Fitment, Comes with Brackets to Mount Intercooler
- 4″ Core Intercooler
- 3″ Intercooler Piping Kit
- Keeps All Stock Parts, A/C etc
NOTES:
- Need to Work On the Exhaust System to Connect to the Downpipe (Due to Many Exhaust Options, The Downpipe Is NOT Connected to Stock Exhaust).
- This Kit Is For Turbo Hardware ONLY, You Will Need to Upgrade Engine’s Fuel System and Tune the Engine. Needs to Upgrade Engine Internal Parts If Running Higher than 6 PSI Boost.
- Installation Guide Is Available on CXRACING’s Website.
APPLICATION:
– Chassis: 1997-2003 Ford F150 4X4
– Motor: 4.6L V8 NA-T
– Turbo: T76, 0.81 AR Exhaust Housing
HEADERS/MANIFOLD:
– 304 Stainless Steel Headers, 1.65″ Runners
– 2.5″ Cross Pipe
– Bolt On Fit, No Need To Cut or Relocate Other Parts
T76 TURBO AND WASTEGATE:
– 4″ Air Inlet, 2.5″ Compressed Air Outlet
– Wet Floating Bearings
– Oil Cooling
– Standard T4 Flange
– 76mm Wheel Compressor
– P Trim .81 A/R Turbine
– 3″ V-band Hot Side
– 60 mm V-band 12 Psi Wastegate
INTERCOOLER:
– Bar and Plate Design
– Core Size: 18″x12″x4″
– Overall Size: 24″x12″x4″
– 4″ Thick Core, 2.5″ Inlet & Outlet
– Intercooler Comes with Aluminum Brackets
ALUMINUM PIPING KIT:
– 2.5″ Hot Side and 3″ Cold Side Mandrel Bent Aluminum Piping Kit
– 50mm BOV, Silicon Hoses and Clamps
RADIATOR SHROUD AND FAN:
– Aluminum Fan Shroud and 2x 14″ Fan, Clears Front Space to Fit Turbo and Cross Pipe
– Comes with 1.5″ Radiator Hard Pipe Kit, Fits Stock Radiator
Reviews
There are no reviews yet.