Collins SHORT SHIFTER FOR 350Z/370Z/G35 CD009 TRANSMISSIONS

Description

This is a brand new Short Throw Shifter for the Nissan 350Z 370Z G35 and G37 6-Speed Transmissions.
The shifter placement on the Nissan 350Z CD009 transmission is approximately (30.5″-31.25″) from the Bell housing mating surface.

This shifter comes with the following parts:

• Shifter Tripod
• Tripod Bracket
• Fasteners to install the Tripod onto the Tail housing
• Shifter Rod Linkage (socket)

This shifter does not come with the following components (You need these components to use this shifter):

• The Press Pin used to hold the Shifter Rod Linkage in place on the shifter rod.
• Any 350Z 370Z G35 G37 (2003-Current) 6-Speed Transmission.

This Shifter is often installed incorrectly, The Shifter Rod Linkage has a small cup on the end of it (located in the bottom right corner of the picture above). This cup houses the Shifter ball on the end of the shifter.

NOTE: WHEN INSTALLING THE SHIFTER ROD LINKAGE, PLACE THE “CUP” FACING DOWNWARD TOWARDS THE BOTTOM OF THE TRANSMISSION OR THE SHIFTER WILL NOT MOVE.

WARNING: You are purchasing a shifter mechanism that has an altered articulation that is substantially shorter than the stock 350Z G35 Articulation. By purchasing this shifter, you acknowledge that the side to side distance is going to be substantially shorter, which translates into re-learning how to drive your manual transmission vehicle. Changing between gears will be difficult at first, and will take sometime to get used to. This shifter has no reverse lockout (you don’t need a reverse lockout once you get past 10mph as you physically can’t get it into reverse after 10mph).