Haltech Platinum Pro ECU – Nissan 180sx Type X Kouki

Description

Features:

• Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
• Uses the cars factory sensors
• Supports Sequential Injection (peak and hold) and Direct fire ignition
• Windows 2000, XP, Vista, Windows 7 compatible software
• Real time programming, instant hesitation free adjustment while engine is running
• Fully user definable 32 x 32 mapping
• Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
• Diagnostic trouble code storing & Check engine light control (Access through laptop only)
• Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22 psi boost)
• Wideband “auto tuning” using user definable target AFR table
• USB and CAN Communication Port

Factory Outputs:

• 4 x Fuel Injector outputs
• 4 x Ignition outputs
• N-VCT (Nissan Variable CAM Timing Control)
• Tacho, Boost Control, AC Clutch Relay, Idle Control
• Thermo Fan, Check Engine Light, Fuel Pump (Variable Speed)

Factory Inputs:

• MAF sensors
• Throttle Position Sensor
• Oxygen sensors
• Coolant Temperature senso
• Vehicle Speed Sensor
• Fuel Temperature sensor
• Knock Detection Sensor

Expansion I/O*:

• 2 x Analogue Voltage inputs
• 2 x Analogue Temperature inputs
• 4 x Digital Outputs
• *Optional auxiliary harness required to be purchased Haltech Part # HT040003

Functions:

• Closed Loop O2 Control
• Closed & Open Loop Boost Control
• Gear Setup
• ACF On Base Tables
• Transient Throttle Enhance
• Decel Cut Over Boost Rev Limiter

Correction Tables: Fuel Ignition:

• Boost
• Cranking
• Air Temp Target Correction
• Zero Throttle Gear Correction
• Cylinder Trim
• TPS Correction
• Generic Correction 1
• Generic Correction 2
• Gear Correction
• Post Start
• Air Temp Duty Correction
• Post Start

Miscellaneous:

• Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
• Max 20 channels logging capability
• Tune can be password protected in software
• Rugged anodized aluminum casing

Power Requirements:

• Source: 8.6 to 16.5 Volts DC
• Consumption: 530mA @ 12Volts DC

Physical ECU Dimensions:

• Length: 154mm (174mm with MAP nipple)
• Width: 158mm
• Height: 42mm
• Weight: 680g (1.5 lb)

Applications:

• Nissan 180sx Type X Kouki (8/96-98)

Transmission:

• Manual only (Automatic not supported)

The Kit Includes:

• Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)